Music Video Apps
Menu
Skip to content

Phone editing Step by step Some effort20 min

Cut your clips to the beat on iPhone and Android

Use auto beat tools in four apps, or place cuts by hand in any editor. Steps for iPhone and Android, about 20 minutes.

Music Video Apps 4 min read

What you need before you start

You need a finished track, 8 to 10 clips, headphones and about 20 minutes. Gather this first:

  • Your track as a file on your phone, with a 20 second section picked for posting.
  • 8 to 10 clips, each at least 3 seconds long and filmed upright, so you have spare footage to slide.
  • Headphones, so you can hear each kick as the cut lands.
  • One editor from the next section.

Use only songs and footage you own or have permission to use. This is not legal advice. The steps below work the same way on iPhone and Android, apart from where each app puts its menus.

Which apps have a beat tool

Four apps list a beat tool: VN, YouTube Create, Videoleap and InShot. All four have an iPhone app and an Android app.

  • VN: beat markers, plus beat-synced AutoCut and BeatsClips templates. Free, and its App Store listing opens with ‘Free with No Watermark’.
  • YouTube Create: beat matching finds the beat of your soundtrack. Free.
  • Videoleap: the App Store listing says it syncs videos to the rhythm of the music. A subscription unlocks unlimited access.
  • InShot: Auto Beat is listed on inshot.com. The store listing does not say about the watermark, so check the export screen.

We read the listings and have not tested the apps. On Android, confirm the beat option is in your version before you start. CapCut’s store listing does not mention beat sync, so use the manual method there.

Work out your tempo and bar length

Divide 60 by the tempo in beats per minute to get the length of one beat in seconds. At 120 BPM a beat is 0.5 seconds, a bar of four beats is 2 seconds, and a 20 second section holds 10 bars. At 90 BPM a bar runs about 2.7 seconds. If you made the track, the tempo is in your project. If you did not, tap along for 15 seconds, count your taps and multiply by 4. Cut on every bar for a calm verse. Cut every two beats, which is 1 second at 120 BPM, for a chorus. The examples below use 120 BPM.

Steps with an auto beat tool

Trim the track, set 9:16, add your clips, switch on the beat tool, then check by ear. Follow these in order:

  1. Trim your track to a 20 second section and save it.
  2. Start a new project and set the canvas to 9:16, which is 1080 x 1920.
  3. Add the track first, then your 8 to 10 clips in the order you want.
  4. Switch on the beat tool: VN beat markers, YouTube Create beat matching, Videoleap sync to rhythm or InShot Auto Beat. Menu names differ, so look for the word beat or rhythm.
  5. Drag each clip edge to the nearest marker or beat. At 120 BPM that is a cut every 2 seconds.
  6. Play it with the sound off, then on, and nudge any cut that lands late.
  7. Export in portrait and watch the whole file once.

Cut by hand in any app

Split your clips at each bar line and the beat is covered in any editor. Use this for CapCut, whose store listing does not mention beat sync, and for any app without a beat tool.

  1. Trim the track so the first kick sits at 0:00.
  2. Play the track and count one two three four along with it. Every count of one is a bar line.
  3. Put the playhead on each bar line and split your clip there. If your app has timeline markers, drop one at each bar line first. LumaFusion lists markers, tags and notes on its timeline.
  4. Check the maths. At 120 BPM the cuts fall at 2, 4, 6 seconds and onwards.
  5. Trim the clips so each one fills the gap between two bar lines.

What to do when cuts land late

If every cut lands late by the same amount, the track probably starts with silence. Trim that silence off the front and play it again. If only some cuts land late, the tempo may drift, as it can with live drums, so fix those cuts by hand and by ear. Move one cut at a time and replay the last 4 seconds after each move. If your energy runs out halfway, cut only the first 8 seconds, which is 4 bars at 120 BPM, and post that. A short edit that lands on the beat reads better than a long one that is off.

Common mistakes

The most common mistake is cutting on every beat for the whole 20 seconds. That is 40 cuts at 120 BPM, which is hard to watch. Save the fast cuts for the chorus. Other mistakes to avoid:

  • Using clips with no spare footage, so you cannot slide a cut onto the beat.
  • Skipping the export screen. The listings for YouTube Create, Videoleap and InShot do not say about watermarks, so check before you post.
  • Checking only with the sound off.
  • Using a song or footage you do not have permission to use.

Make it easier next time

Keep a note of the tempo and bar length for every track, so the next edit skips the tempo work. Save the 20 second section as its own file with the BPM in the name, for example chorus 120. Film your clips in 3 to 4 second takes so each one has slack at both ends. In VN you can save your own templates to reuse, so save one once your cut pattern works. If you are choosing between two free editors for this, InShot vs VN sets them side by side.

Frequently asked questions

How do I cut video to the beat on iPhone?

Use an app with a beat tool, such as VN, YouTube Create, Videoleap or InShot, or split your clips at each bar line by hand in any editor. Trim your track to about 20 seconds first and work out the tempo. Then play the edit with the sound on and nudge any late cut.

Which free app cuts to the beat?

VN is free with no watermark according to its App Store listing, and it lists beat markers and beat-synced templates. YouTube Create is free and lists beat matching. For InShot and Videoleap, check the export screen for a watermark before you post.

Does CapCut cut to the beat?

CapCut's store listing does not say it has beat sync. Use the manual method instead: split your clips at each bar line, or drop timeline markers there if your version has them.

How long does it take to cut clips to the beat?

About 20 minutes for a 20 second edit with 8 to 10 clips. It takes less once you have noted your track's tempo and bar length. The manual method adds a few minutes because you place every cut yourself.

Do the beat tools work the same on Android?

All four apps have an Android version. The beat details for Videoleap and YouTube Create come from their App Store listings, so check that the option is in your Android version before you start.